Network
IP Address

### ip address

Netmask

### netmask

Wireless
Channel

### channel

SSID

### ssid

BSSID

### bssid

Map
Map Server

### map server

The Network Map gets the terrain data from the server at this address.

If your mesh has internet access you will not need to change this setting.

If your mesh does not have internet access you will need to set up your own map server and enter its address here.

You can learn how to set up your own map server by reading HowToMapServer

B.A.T.M.A.N.
Vis Server

### visualization server

The Network Map gets the available mesh nodes and their connections from the server at this address.

By default the visualization server runs on the same address as the dashboard server and you should not need to change it.

You can learn how to configure a different vis server by reading the HowtoVisServer

Gateway
Routing Class

### routing class

Gateway Class

### gateway class

The gateway class is used to tell other nodes in the network your available internet bandwidth. Enter any number (optionally followed by "kbit" or "mbit") and the daemon will guess your appropriate gateway class. Use "/" to seperate the download and upload rates. You can omit the upload rate and batmand will assume an upload of download / 5.

default: `0 -> gateway disabled` examples:
`5000
5000kbit
5mbit
5mbit/1024
5mbit/1024kbit
5mbit/1mbit
`

Telephony
SIP Trunk
Address

### sip address

Username

### sip username

Password

### sip password

Location